QNix® 1500 / 1200 is our recommendation for vehicle assessment
The QNix® 1500 is reliable, easy to use and durable. Therefore it is the most popular coating thickness gauge for applications in the motor vehicle sector and indispensable for motor vehicle experts.
Do you produce damage reports and value appraisals and require a coating thickness gauge for the vehicle assessment? Do you value easy operation and reliable results?
If so, the QNix® 1500 is the right gauge for you.
Due to the 3-point contact, you can position the QNix® 1500 easily and safely and always receive reliable measurement results.
By means of two independent measurement probes, you instantly recognise on which basic substrate you are taking a measure. You can take coating thickness measurements on steel, iron (Fe) and non-ferrous metals (NFe) like aluminium, zinc, copper and brass.
All QNix® coating thickness gauges function according to our easy-to-use principle: position, measure and read.
QNix® 1500 in Detail
Advantages of application
- 3-point contact: preventstilting
- Measured values, battery status, measuring unit, mode: easy to check
- High-resolution LCD: easy to read even in strong sunlight
- Large numbers: optimal readability
- Polished ruby measuring head tip: protection of the measurement probe and the surfaces to be measured
QNix® 1500 probes (Fe, NFe)
| Probe | QNix® 1500 Fe/NFe 5 mm |
|---|---|
| Measurement range | 5000 µm |
| Substrate | Fe/NFe |
| Deviation |
0 – 999 µm: +/- (2% +- 1 µm) 1000 – 5000 µm: +/- 3,5% |
| Fulfills the following standards | DIN EN ISO 2808, DIN 50981, DIN 50984, ISO 2178, BS 5411 (3 & 11), BS 3900 - C5, ASTM B 499, ISO 2360, ASTM D 1400, ASTM D 1186, ASTM D 7091 |
| Smallest measurement area | 10 x 10 mm |
| Smallest radius of curvature |
Convex: 5 mm
Concave: 25 mm |
| Smallest substrate thickness |
Fe: 200 µm
NFe: 50 µm |
QNix® 1200 probes (Fe)
| Probe | QNix® 1200 Fe 2 mm |
|---|---|
| Measurement range | 2000 µm |
| Substrate | Fe |
| Deviation | 0 – 2000 µm: +/- (2% +- 1 µm) |
| Fulfills the following standards | DIN EN ISO 2808, DIN 50981, ISO 2178, BS 5411 (11), BS 3900-C5, ASTM B 499, ASTM D 1186, ASTM D 70 |
| Smallest measurement area | 10 x 10 mm |
| Smallest radius of curvature |
Convex: 5 mm
Concave: 25 mm |
| Smallest substrate thickness | 200 µm |
Technical data QNix® 1500 / 1200
| Measuring principle |
Two magnetic measuring principles Fe: Magnetic induction - see Fe* (ISO 278) NFe: Eddy current - see NFe* (ISO 2360) |
|---|---|
| Probe type | integrated |
| According to the standard | See: Our range of probes for the QNix® 1500/1200 |
| Switching units | µm/mil |
| Period between measurements | 1250 ms |
| Measurement value display | From 0 – 999 in µm, in mm as of 1000 µm |
| Display resolution |
0.1 µm in the range 0 – 99.9 µm 1 µm in the range 100 – 999 µm 0.01 mm starting at 1000 µm |
| Display | LCD |
| Operating temperature range | 0 - 50° |
| Permissible storage temperature | -10° C - 60° C |
| Power supply | 1 x battery: 9V (type 9V) |
| Dimensions (L x W x H in mm) | 166 x 64 x 34 |
| Weight incl. batteries | 150 g |
Fe*: Measurement of non-ferrous or non-ferromagnetic coatings on ferromagnetic substrate, such as measurements on iron or steel substrate.
NFe*: Measurement of non-ferrous or non-ferromagnetic and non-electrically conductive coatings on non-ferrous or non-ferromagnetic and electrically conductive substrate, such as measurements on aluminium, zinc, copper, brass and certain stainless steel substrates.
Subject to technical changes without notice